|
| |

只1550RMB!(税前价)
购买此产品
iUSBDAQ –
U1208LOG, USB
全速多功能数据采集卡,独特的三合一USB数据采集卡
结合PC控制的USB数据采集卡+独立的U盘存储数据记录仪+摄像头同步录像软件于一体的USB数据采集卡.是目前国内外市场上唯一的结合此三项功能为一体的USB数据采集卡,同时价格又十分合理.
下载iUSBDAQ
– U1208LOG的驱动软件和使用说明书,
参数等.
The iUSBDAQ - U1208LOG is the
only multifunction
three in one (3-in-1) USB data acquisition module
that provides PC control mode for fast speed data acquisition and transfer (up
to 64KSamples/s)
as well as standalone data logging mode for direct data logging into USB flash
drive without computer, the storage capacity is virtually unlimited, it's up to
your USB flash disk space. Another unique feature that iUSBDAQ - U1208LOG
brings, is the build-in video functions in programming APIs as well as in the
FREE ready-to-run iDAQTest&Log software for easy integration and synchronization
of data and video. A dedicated video trigger output line is also provided in the
hardware for external synchronization with other devices.
The whole package
includes:
-
iUSBDAQ - U1208LOG module
-
FREE USB power adapter as
power supply for standalone logging mode.
Input: AC100-240V, 50-60HZ. Output: DC 5.0V, 600mA.
-
FREE USB2.0 cable (with
noise protection filter ring)
used for PC control,
also used as cable for USB power adapter
-
FREE Screw driver
-
FREE iDAQTest&Log software
with build-in real time life video and data
synchronized display, avi file recording, avi file playback, data logging,
analog voltages, digital DIOs and counter measuring and PWM output
testing functions. This is a very easy to use, yet functions rich software
for users who do not want to program their own software. It's ready to run.
-
FREE programming API for
C/C++, VB, LabVIEW drivers (with rich
examples) that can access all functions for AIs, DIOs, PWM, counter as well
as video functions, this is for users who wish to create their own software.
With the decrease of video
camera/webcam prices and increased computer powers, the demand to add video
functions into
traditional data acquisition application is increasing. Synchronization between
video and data is always not an easy thing to do,
since consumer video camera/webcams do not provide trigger out or trigger in
line, besides such video/data application is
usually very expensive. iUSBDAQ - U1208LOG provides a solution that makes
integration of video and data easy, yet very cost
effective. iUSBDAQ - U1208LOG introduces the
DAQCAM
marriage concept that can help your end application to be more
competitive on the market.
The standalone USB flash drive data logger mode will turn this USB DAQ into USB
OTG (on the go) device. It can be used
without computer for long time data logging at field, logging period from
1second to 12 hours. It logs 8 channels of analog
inputs, 16 digital line status as well as the 16 bit counter value. On board
real time clock will time stamp the logging file. A 3V
lithium battery on board will keep the real time clock date/time. Besides, at
each time of data logging, a
dedicated video/log
"trigger out" line
will output a pulse, which can be used to synchronize external measurement
devices if needed.
Below highlights the key
feature points of the iUSBDAQ - U1208LOG USB data acquisition module.
PC control mode:
-
USB 2.0/1.1 full speed
interface
-
USB bus powered
-
8 Single-Ended, 12-Bit
analog Inputs
-
0-4.096 V analog input
range
-
Up to
64 kSamples/Sec
throughput rate with single channel up to 53kSamples/Second for continuously
streaming to PC
-
One dedicated "trigger in"
line for streaming mode data acquisition
-
One dedicated video/Log
"trigger out" line that sends out pulses for video frames or when log data
in standalone data logging mode
-
Two programmable 10-bit
PWM outputs (3kHz- 333kHz)
-
16 channels of
Bi-Directional Digital I/O lines (250HZ update rate)
-
One 16-Bit counter
-
240 bytes EEPROM reserved
for user data
-
Multiple iUSBDAQs can be
connected on same computer
-
Simultaneous Streaming
from Multiple iUSBDAQs Possible, streaming data and streaming video at the
same time possible.
-
Works with Windows 2000,
or WinXP. Recommend 2.4GHZ or up CPU and at least 512M RAM
USB flash drive
standalone data logger mode:
-
Virtually unlimited
storage size for data logging, it's up to your USB flash disk's storage
size.
-
Can be powered by USB bus
from computer or use included USB power adaptor without computer.
-
Logging 8 channels of
analog inputs, 16 channels of digital inputs and one 16 bit counter. All
data are time stamped.
-
Logging interval/frequency
from 1 second to 12 hours, unlimited log period as long as USB disk has
enough free space. Logging frequency
configurable with FREE iDAQTest&Log software
-
Automatic file name
creation with time stamp.
-
Raw data conversion
utility and simple analysis functions provided in iDAQTest&Log software
-
On board lithium battery
to power the real time clock. Date/time setting of real time clock on board
is configurable with iDAQTest&Log software
-
Dedicated log "trigger
out" line for synchronization of external devices.
Video Functions:
-
Real time video display
along with the data readings (8 ch. analog inputs, 16 ch. digital IOs and
one counter)
-
AVI recording along with
data recording (8 ch. analog inputs, 16 ch. digital IOs and one counter)
-
Playback AVI file along
with data (8 ch. analog inputs, 16 ch. digital IOs and one counter)
-
Dedicated video "trigger
out" line
-
Work with USB webcam or
firewire camera that support WDM driver or are directshow compliant
General Information:
-
30 Days Money Back
Guarantee, 6 Month Warranty and Trade In Policy
-
Approximately 3.5" x
3.375" x 1.125" (9cm x 8.5cm x 3cm)
-
0°C to 70°C operating
temperature range
以下是免费现成的独立可运行的
iDAQTest&Log
测试和记录软件的一些界面图.




|